Structural and thermal analyses in semiconducting and metallic zigzag single-walled carbon nanotubes using molecular dynamics simulations.

Equilibrium molecular dynamics (EMD) simulations have been performed to investigate the structural analysis and thermal conductivity (λ) of semiconducting (8,0) and metallic (12,0) zigzag single-walled carbon nanotubes (SWCNTs) for varying ±Î³(%) strains. For the first time, the present outcomes provide valuable insights into the relationship between the structural properties of zigzag SWCNTs and corresponding thermal behavior, which is essential for the development of high-performance nanocomposites. The radial distribution function (RDF) has been employed to assess the buckling and deformation understandings of the (8,0) and (12,0) SWCNTs for a wide range of temperature T(K) and varying ±Î³(%) strains. The visualization of SWCNTs shows that the earlier buckling and deformation processes are observed for semiconducting SWCNTs as compared to metallic SWCNTs for high T(K) and it also evident through an abrupt increase in RDF peaks. The RDF and visualization analyses demonstrate that the (8,0) SWCNTs can more tunable under compressive than tensile strains, however, the (12,0) zigzag SWCNTs indicate an opposite trend and may tolerate more tensile than compressive strains. Investigations show that the tunable domain of ±Î³(%) strains decreases from (-10%≤ γ ≤+19%) to (-5%≤ γ ≤+10%) for (8,0) SWCNTs and the buckling process shifts to lower ±Î³(%) for (12,0) SWCNTs with increasing T(K). For intermediate-high T(K), the λ(T) of (12,0) SWCNTs is high but the (8,0) SWCNTs show certainly high λ(T) for low T(K). The present λ(T, ±Î³) data are in reasonable agreement with parts of previous NEMD, GK-HNEMD data and experimental investigations with simulation results generally under predicting the λ(T, ±Î³) by the ∼1% to ∼20%, regardless of the ±Î³(%) strains, depending on T(K). Our simulation data significantly expand the strain range to -10% ≤ γ ≤ +19% for both zigzag SWCNTs, depending on temperature T(K). This extension of the range aims to establish a tunable regime and delve into the intrinsic characteristics of zigzag SWCNTs, building upon previous work.

Exploring Advanced Functionalities of Carbon Fiber-Graded PEEK Composites as Bone Fixation Plates Using Finite Element Analysis.

This study aims to address the challenges associated with conventional metallic bone fixation plates in biomechanical applications, such as stainless steel and titanium alloys, including stress shielding, allergic reactions, corrosion resistance, and interference with medical imaging. The use of materials with a low elastic modulus is regarded as an effective approach to overcome these problems. In this study, the impact of different types of chopped carbon fiber-reinforced polyether ether ketone (CCF/PEEK) functionally graded material (FGM) bone plates on stress shielding under static and instantaneous dynamic loading was explored using finite element analysis (FEA). The FGM bone plate models were established using ABAQUS and the user's subroutine USDFLD and VUSDFLD, and each model was established with an equivalent overall elastic modulus and distinctive distributions. The results revealed that all FGM bone plates exhibited lower stress shielding effects compared to metal bone plates. Particularly, the FGM plate with an elastic modulus gradually increased from the centre to both sides and provided maximum stress stimulation and the most uniform stress distribution within the fractured area. These findings offer crucial insights for designing implantable medical devices that possess enhanced mechanical adaptability.

Comparison of cytotoxicity of Miltefosine and its niosomal form on chick embryo model.

Various drugs have been used for the treatment of leishmaniasis, but they often have adverse effects on the body's organs. In this study, we aimed to explore the effects of one type of drug, Miltefosine (MIL), and its analogue or modifier, liposomal Miltefosine (NMIL), on several fetal organs using both in silico analysis and practical tests on chicken embryos. Our in silico approach involved predicting the affinities of MIL and NMIL to critical proteins involved in leishmaniasis, including Vascular Endothelial Growth Factor A (VEGF-A), the Kinase insert domain receptor (KDR1), and apoptotic-regulator proteins (Bcl-2-associate). We then validated and supported these predictions through in vivo investigations, analyzing gene expression and pathological changes in angiogenesis and apoptotic mediators in MIL- and NMIL-treated chicken embryos. The results showed that NMIL had a more effective action towards VEGF-A and KDR1 in leishmaniasis, making it a better candidate for potential operative treatment during pregnancy than MIL alone. In vivo, studies also showed that chicken embryos under MIL treatment displayed less vascular mass and more degenerative and apoptotic changes than those treated with NMIL. These results suggest that NMIL could be a better treatment option for leishmaniasis during pregnancy.

Applied Methods to Assess the Antimicrobial Activity of Metallic-Based Nanoparticles.

With the rise of antibiotic resistance, the drive to discover novel antimicrobial substances and standard testing methods with the aim of controlling transmissive diseases are substantially high. In healthcare sectors and industries, although methods for testing antibiotics and other aqueous-based reagents are well established, methods for testing nanomaterials, non-polar and other particle-based suspensions are still debatable. Hence, utilities of ISO standard validations of such substances have been recalled where corrective actions had to be taken. This paper reports a serial analysis obtained from testing the antimicrobial activities of 10 metallic-based nanomaterials against 10 different pathogens using five different in vitro assays, where the technique, limitation and robustness of each method were evaluated. To confirm antimicrobial activities of metallic-based nanomaterial suspensions, it was found that at least two methods must be used, one being the agar well diffusion method, which was found to be the most reliable method. The agar well diffusion method provided not only information on antimicrobial efficacy through the size of the inhibitory zones, but it also identified antimicrobial ions and synergistic effects released by the test materials. To ascertain the effective inhibitory concentration of nanoparticles, the resazurin broth dilution method is recommended, as MIC can be determined visually without utilising any equipment. This method also overcomes the limit of detection (LoD) and absorbance interference issues, which are often found in the overexpression of cell debris and nanoparticles or quantum dots with optical profiles. In this study, bimetallic AgCu was found to be the most effective antimicrobial nanoparticle tested against across the bacterial (MIC 7 µg/mL) and fungal (MIC 62.5 µg/mL) species.

Functionalized Copper Nanoparticles with Gold Nanoclusters: Part I. Highly Selective Electrosynthesis of Hydrogen Peroxide.

Copper nanoparticles (CuNPs) and gold nanoclusters (AuNCs) show a high catalytic performance in generating hydrogen peroxide (H2O2), a property that can be exploited to kill disease-causing microbes and to carry carbon-free energy. Some combinations of NPs/NCs can generate synergistic effects to produce stronger antiseptics, such as H2O2 or other reactive oxygen species (ROS). Herein, we demonstrate a novel facile AuNC surface decoration method on the surfaces of CuNPs using galvanic displacement. The Cu-Au bimetallic NPs presented a high selective production of H2O2 via a two-electron (2e-) oxygen reduction reaction (ORR). Their physicochemical analyses were conducted by scanning electron microscopy (SEM), transmitting electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). With the optimized Cu-Au1.5NPs showing their particle sizes averaged in 53.8 nm, their electrochemical analysis indicated that the pristine AuNC structure exhibited the highest 2e- selectivity in ORR, the CuNPs presented the weakest 2e- selectivity, and the optimized Cu-Au1.5NPs exhibited a high 2e- selectivity of 95% for H2O2 production, along with excellent catalytic activity and durability. The optimized Cu-Au1.5NPs demonstrated a novel pathway to balance the cost and catalytic performance through the appropriate combination of metal NPs/NCs.

Exploring mesoporous silica nanoparticles as oral insulin carriers: In-silico and in vivo evaluation.

The advancements in nanoscience have brought attention to the potential of utilizing nanoparticles as carriers for oral insulin administration. This study aims to investigate the effectiveness of synthesized polymeric mesoporous silica nanoparticles (MSN) as carriers for oral insulin and their interactions with insulin and IR through in-silico docking. Diabetic rats were treated with various MSN samples, including pure MSN, Amin-grafted MSN/PEG/Insulin (AMPI), Al-grafted MSN/PEG/Insulin (AlMPI), Zinc-grafted MSN/PEG/Insulin (ZNPI), and Co-grafted MSN/PEG/Insulin (CMPI). The nanocomposites were synthesized using a hybrid organic-inorganic method involving MSNs, graphene oxide, and insulin. Characterization of the nanocomposites was conducted using X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). In vivo tests included the examination of blood glucose levels and histopathological parameters of the liver and pancreas in type 1 diabetic rats. The MSN family demonstrated a significant reduction in blood glucose levels compared to the diabetic control group (p < 0.001). The synthesized nanocomposites exhibited safety, non-toxicity, fast operation, self-repairing pancreas, cost-effectiveness, and high efficiency in the oral insulin delivery system. In the in-silico study, Zn-grafted MSN, Co-grafted MSN, and Al-grafted MSN were selected. Docking results revealed strong interactions between MSN compounds and insulin and IR, characterized by the formation of hydrogen bonds and high binding energy. Notably, Co-grafted MSN showed the highest docking scores of -308.171 kcal/mol and -337.608 kcal/mol to insulin and IR, respectively. These findings demonstrate the potential of polymeric MSN as effective carriers for oral insulin, offering promising prospects for diabetes treatment.

The inhibitory effect of 6-gingerol and cisplatin on ovarian cancer and antitumor activity: In silico, in vitro, and in vivo.

Background: Epithelial ovarian cancer is very common in women and causes hundreds of deaths per year worldwide. Chemotherapy drugs including cisplatin have adverse effects on patients' health. Complementary treatments and the use of herbal medicines can help improve the performance of medicine. 6-Gingerol is the major pharmacologically active component of ginger. In this study, we compared the effects of 6-gingerol, cisplatin, and their combination in apoptotic and angiogenetic activities in silico, in test tubes, and in in vivo assays against two ovarian cancer cell lines: OVCAR-3 and human umbilical vein endothelial cells (HUVECs). Methods: The drug-treated cell lines were evaluated for their cytotoxicity, cell cycle, and apoptotic and angiogenetic gene expression changes. Results: The proportion of apoptosis treated by 6-gingerol coupled with cisplatin was significantly high. In the evaluation of the cell cycle, the combination therapy also showed a significant promotion of a higher extent of the S sequence. The expression of p53 level, Caspase-8, Bax, and Apaf1 genes was amplified again with combination therapy. Conversely, in both cell lines, the cumulative drug concentrations reduced the expression of VEGF, FLT1, KDR, and Bcl-2 genes. Similarly, in the control group, combination treatment significantly decreased the expression of VEGF, FLT1, KDR, and Bcl-2 genes in comparison to cisplatin alone. Conclusions: The findings of the present study demonstrated that the cisplatin and 6-gingerol combination is more effective in inducing apoptosis and suppressing the angiogenesis of ovarian cancer cells than using each drug alone.

Sustainable γ-cyclodextrin frameworks containing ultra-fine silver nanoparticles with enhanced antimicrobial efficacy.

Cyclodextrin metal-organic frameworks (CD-MOF) are a class of biocompatible MOF with a great potential in drug delivery applications. Original CD-MOF crystals are fragile and large (0.2-1 mm), which are less useful in pharmaceutical applications. Cetyltrimethylammonium bromide and long chain poly(ethylene) glycol, used in size modulation to produce nanosized CD-MOF can compromise the biocompatibility, and physiochemical properties of CD-MOF as their complete removal from frameworks is difficult. To avoid the use of above-mentioned modulators, herein, we demonstrate the synthesis of nanosized CD-MOF using triethylamine (TEA) as a modulator to reduce their size to ~254 nm. The MOF characteristics such as crystal and chemical structure remain unaffected and the surface area of CD-MOF synthesised with TEA is measured 1075.5 m2/g, almost 50 % higher than those of synthesised using bulky modulators. The improved CD-MOF architecture utilized for the in-situ synthesis of silver nanoparticles resulted in enhanced antimicrobial efficacy tested against Staphylococcus aureus and Escherichia coli bacteria and Candida albicans fungus. And minimum inhibitory concentration (MIC) is recorded in the range of 31-15 µg/mL. Overall, the structural improvement in CD-MOF supported with thorough comparative investigations and enhanced antimicrobial efficacy could be very helpful in further establishing them in biomedicine field.

pH Alteration in Plant-Mediated Green Synthesis and Its Resultant Impact on Antimicrobial Properties of Silver Nanoparticles (AgNPs).

Plant-mediated green synthesis is a cost-effective and eco-friendly process used to synthesize metallic nanoparticles. Experimental pH is of interest due to its ability to influence nanoparticle size and shape; however, little has been explored in comparison to the influence of this parameter on the therapeutic potential of resultant metallic nanoparticles. Our work investigated the influence of pH alternation on antimicrobial properties of plant-mediated green synthesized (using Spinacia oleracea leaf extract) silver nanoparticles. We further investigated if the antimicrobial activity was sustained at 8 weeks (after initial green synthesis). Antimicrobial properties were evaluated against Escherichia coli, Staphylococcus aureus, and Candida albicans. Our work confirmed that experimental pH in plant-mediated green synthesis of silver nanoparticles influenced their resultant antimicrobial properties. Silver nanoparticles generated at experimental pH 4,5, and nine showed activity against E. coli which was sustained at various levels over 8 weeks. No antimicrobial activity was observed against S. aureus, and weak antimicrobial activity against C. albicans. These interesting findings highlight the importance of experimental pH. Further understanding of the role experimental pH plays on resultant metallic nanoparticle properties as it relates to biological and therapeutic impact is required, which will have an impact on wider applications beyond antimicrobial activity.

Molecular dynamics simulation on surface modification of quantum scaled CuO nano-clusters to support their experimental studies.

Interest in nanoparticle modification using functional chemicals has increased rapidly, as it allows more freedom of physiochemical tuning of the nanoparticle's surface into biomedically oriented and designated properties. However, the observation and detection of the thin molecular layers on the nanoparticle surface are very challenging under current analytical facilities. The focus of this research is to demonstrate fundamental interactions between the surface treated nanoparticles and their host liquid media using lab-based experimentation and simulation. In this research, investigation has been carried out on analyzing the surface compatibility and the diffusivity of modified CuO nanoparticles (CuONPs) with short-chain carboxylate-terminated molecules in biofluids. Moreover, during the current Covid-19 pandemic, the Cu/CuONPs have proved effective in killing SARS-CoV1/2 and other airborne viruses. This research was conducted at the molecular level with joint consideration of experimental and simulation studies for characterization of variables. Experimental tests conducted using Fourier Transform Infrared (FTIR) spectroscopy demonstrated several spectral ranges of interest, specifically, detection of three major carboxylate attachments (i.e., 1667-1609 cm-1, 1668-1557 cm-1, etc.) were found. From simulation, similar attachment styles were observed by the LAMMPS simulation package that mimicked similar agglomerations with a predicted diffusion coefficient as recorded to be 2.28E-9 m2/s. Viscosities of modified nanofluids were also compared with unmodified nanofluids for defining aggregation kinetics.

Comparative molecular dynamics simulations of thermal conductivities of aqueous and hydrocarbon nanofluids.

The addition of metal oxide nanoparticles to fluids has been used as a means of enhancing the thermal conductive properties of base fluids. This method formulates a heterogeneous fluid conferred by nanoparticles and can be used for high-end fluid heat-transfer applications, such as phase-change materials and fluids for internal combustion engines. These nanoparticles can enhance the properties of both polar and nonpolar fluids. In the current paper, dispersions of nanoparticles were carried out in hydrocarbon and aqueous-based fluids using molecular dynamic simulations (MDS). The MDS results have been validated using the autocorrelation function and previous experimental data. Highly concurrent trends were achieved for the obtained results. According to the obtained results of MDS, adding CuO nanoparticles increased the thermal conductivity of water by 25% (from 0.6 to 0.75 W·m-1·K-1). However, by adding these nanoparticles to hydrocarbon-based fluids (i.e., alkane) the thermal conductivity was increased three times (from 0.1 to 0.4 W·m-1·K-1). This approach to determine the thermal conductivity of metal oxide nanoparticles in aqueous and nonaqueous fluids using visual molecular dynamics and interactive autocorrelations demonstrate a great tool to quantify thermophysical properties of nanofluids using a simulation environment. Moreover, this comparison introduces data on aqueous and nonaqueous suspensions in one study.

Efficacy of Green Cerium Oxide Nanoparticles for Potential Therapeutic Applications: Circumstantial Insight on Mechanistic Aspects.

Green synthesized cerium oxide nanoparticles (GS-CeO2 NPs) have a unique size, shape, and biofunctional properties and are decorated with potential biocompatible agents to perform various therapeutic actions, such as antimicrobial, anticancer, antidiabetic, and antioxidant effects and drug delivery, by acquiring various mechanistic approaches at the molecular level. In this review article, we provide a detailed overview of some of these critical mechanisms, including DNA fragmentation, disruption of the electron transport chain, degradation of chromosomal assemblage, mitochondrial damage, inhibition of ATP synthase activity, inhibition of enzyme catalytic sites, disorganization, disruption, and lipid peroxidation of the cell membrane, and inhibition of various cellular pathways. This review article also provides up-to-date information about the future applications of GS-CeONPs to make breakthroughs in medical sectors for the advancement and precision of medicine and to effectively inform the disease diagnosis and treatment strategies.

Exploiting the antiviral potential of intermetallic nanoparticles.

Viral pandemic outbreaks cause a significant burden on global health as well as healthcare expenditure. The use of antiviral agents not only reduces the spread of viral pathogens but also diminishes the likelihood of them causing infection. The antiviral properties of novel copper-silver and copper-zinc intermetallic nanoparticles against Escherichia coli bacteriophage MS2 (RNA virus) and Escherichia coli bacteriophage T4 (DNA virus) are presented. The intermetallic nanoparticles were spherical in shape and were between 90 and 120 nm. Antiviral activity was assessed at concentrations ranging from 0.05 to 2.0 wt/v% for 3 and 24 h using DNA and RNA virus model organisms. Both types of nanoparticles demonstrated strong potency towards RNA viruses (> 89% viral reduction), whilst copper-silver nanoparticles were slightly more toxic towards DNA viruses when compared to copper-zinc nanoparticles. Both nanoparticles were then incorporated into polymeric fibres (carrier) to investigate their antiviral effectiveness when composited into polymeric matrices. Fibres containing copper-silver nanoparticles exhibited favourable antiviral properties, with a viral reduction of 75% after 3 h of exposure. The excellent antiviral properties of the intermetallic nanoparticles reported in this study against both types of viruses together with their unique material properties can make them significant alternatives to conventional antiviral therapies and decontamination agents.

Nano-CuO causes cell damage through activation of dose-dependent autophagy and mitochondrial lncCyt b-AS/ND5-AS/ND6-AS in SH-SY5Y cells.

Metal copper oxide nanoparticles (nano-CuO) are under mass production and have been widely utilized in many fields including catalysis, gas sensors, semiconductor materials, etc. The broad applications of nano-CuO have increased the possibility of risk to incidental exposure to the environment, and therefore, an in-depth investigation of their effects on live cells is required. This study investigated the impact of the nano-CuO on SH-SY5Y cells, and findings showed that the ratio of LC3-II/LC3-I was significantly increased in SH-SY5Y cells when the cells were treated with nano-CuO. However, if the autophagy inhibitor Bafilomycin A1 (Baf A1) was co-treated, the ratio of LC3-II/LC3-I was further improved. These outcomes might indicate that autophagy flux was permanently elevated by adding nano-CuO. Further results found highly activated levels of long noncoding RNAs (lncRNAs) under nano-CuO treatment. The data illustrate a mechanism that nano-CuO can promote autophagy and activate lncCyt b-AS/ND5-AS/ND6-AS in SH-SY5Y cells and have critical implications for nanoparticle biomedical applications.

Antiviral Efficacy of Metal and Metal Oxide Nanoparticles against the Porcine Reproductive and Respiratory Syndrome Virus.

Porcine reproductive and respiratory syndrome viruses (PRRSV) are responsible for one of the most economically important diseases affecting the global pig industry. On-farm high-efficiency particulate air (HEPA) filtration systems can effectively reduce airborne transmission of PRRSV and the incidence of PRRS, but they are costly, and their adoption is limited. Therefore, there is a need for low-cost alternatives, such as antimicrobial filters impregnated with antiviral nanoparticles (AVNP). During the past 10 years, tailored intermetallic/multi-elemental AVNP compositions have demonstrated effective performance against human viruses. In this study, a panel of five AVNP was evaluated for viricidal activity against PRRSV. Three AVNP materials: AVNP2, copper nanoparticles (CuNP), and copper oxide nanoparticles (CuONP), were shown to exert a significant reduction (>99.99%) in virus titers at 1.0% (w/v) concentration. Among the three, CuNP was the most effective at lower concentrations. Further experiments revealed that AVNP generated significant reductions in viral titers within just 1.5 min. For an optimal reduction in viral titers, direct contact between viruses and AVNP was required. This was further explained by the inert nature of these AVNP, where only negligible leaching concentrations of Ag/Cu ions (0.06-4.06 ppm) were detected in AVNP supernatants. Real-time dynamic light scatting (DLS) and transmission electron microscopic (TEM) analyses suggested that the mono-dispersive hydrodynamic behavior of AVNPs may have enhanced their antiviral activity against PRRSV. Collectively, these data support the further evaluation of these AVNP as candidate nanoparticles for incorporation into antimicrobial air-filtration systems to reduce transmission of PRRSV and other airborne pathogens.

Surface interactions and viability of coronaviruses.

The recently emerged coronavirus pandemic (COVID-19) has become a worldwide threat affecting millions of people, causing respiratory system related problems that can end up with extremely serious consequences. As the infection rate rises significantly and this is followed by a dramatic increase in mortality, the whole world is struggling to accommodate change and is trying to adapt to new conditions. While a significant amount of effort is focused on developing a vaccine in order to make a game-changing anti-COVID-19 breakthrough, novel coronavirus (SARS-CoV-2) is also developing mutations rapidly as it transmits just like any other virus and there is always a substantial chance of the invented antibodies becoming ineffective as a function of time, thus failing to inhibit virus-to-cell binding efficiency as the spiked protein keeps evolving. Hence, controlling the transmission of the virus is crucial. Therefore, this review summarizes the viability of coronaviruses on inanimate surfaces under different conditions while addressing the current state of known chemical disinfectants for deactivation of the coronaviruses. The review attempts to bring together a wide spectrum of surface-virus-cleaning agent interactions to help identify material selection for inanimate surfaces that have frequent human contact and cleaning procedures for effective prevention of COVID-19 transmission.

A novel treatment strategy for preterm birth: Intra-vaginal progesterone-loaded fibrous patches.

Progesterone-loaded poly(lactic) acid fibrous polymeric patches were produced using electrospinning and pressurized gyration for intra-vaginal application to prevent preterm birth. The patches were intravaginally inserted into rats in the final week of their pregnancy, equivalent to the third trimester of human pregnancy. Maintenance tocolysis with progesterone-loaded patches was elucidated by recording the contractile response of uterine smooth muscle to noradrenaline in pregnant rats. Both progesterone-loaded patches indicated similar results from release and thermal studies, however, patches obtained by electrospinning had smaller average diameters and more uniform dispersion compared to pressurized gyration. Patches obtained by pressurized gyration had better results in production yield and tensile strength than electrospinning; thereby pressurized gyration is better suited for scaled-up production. The patches did not affect cell attachment, viability, and proliferation on Vero cells negatively. Consequently, progesterone-loaded patches are a novel and successful treatment strategy for preventing preterm birth.

Comparative Study of the Antimicrobial Effects of Tungsten Nanoparticles and Tungsten Nanocomposite Fibres on Hospital Acquired Bacterial and Viral Pathogens.

A significant proportion of patients acquire hospital associated infections as a result of care within the NHS each year. Numerous antimicrobial strategies, such as antibiotics and surface modifications to medical facilities and instruments, have been devised in an attempt to reduce the incidence of nosocomial infections, but most have been proven unsuccessful and unsustainable due to antibiotic resistance. Therefore, the need to discover novel materials that can combat pathogenic microorganisms is ongoing. Novel technologies, such as the potential use of nanomaterials and nanocomposites, hold promise for reducing these infections in the fight against antimicrobial resistance. In this study, the antimicrobial activity of tungsten, tungsten carbide and tungsten oxide nanoparticles were tested against Escherichia coli, Staphylococcus aureus and bacteriophage T4 (DNA virus). The most potent nanoparticles, tungsten oxide, were incorporated into polymeric fibres using pressurised gyration and characterised using scanning electron microscopy and energy dispersive X-ray spectroscopy. The antimicrobial activity of tungsten oxide/polymer nanocomposite fibres was also studied. The results suggest the materials in this study promote mediation of the inhibition of microbial growth in suspension.

Synergistic Antifungal Study of PEGylated Graphene Oxides and Copper Nanoparticles against Candida albicans.

The coupling reactions of polyethylene glycol (PEG) with two different nano-carbonaceous materials, graphene oxide (GO) and expanded graphene oxide (EGO), were achieved by amide bond formations. These reactions yielded PEGylated graphene oxides, GO-PEG and EGO-PEG. Whilst presence of the newly formed amide links (NH-CO) were confirmed by FTIR stretches observed at 1732 cm-1 and 1712 cm-1, the associated Raman D- and G-bands resonated at 1311/1318 cm-1 and 1584/1595 cm-1 had shown the carbonaceous structures in both PEGylated products remain unchanged. Whilst SEM images revealed the nano-sheet structures in all the GO derivatives (GO/EGO and GO-PEG/EGO-PEG), TEM images clearly showed the nano-structures of both GO-PEG and EGO-PEG had undergone significant morphological changes from their starting materials after the PEGylated processes. The successful PEGylations were also indicated by the change of pH values measured in the starting GO/EGO (pH 2.6-3.3) and the PEGylated GO-PEG/EGO-PEG (pH 6.6-6.9) products. Initial antifungal activities of selective metallic nanomaterials (ZnO and Cu) and the four GO derivatives were screened against Candida albicans using the in vitro cut-well method. Whilst the haemocytometer count indicated GO-PEG and copper nanoparticles (CuNPs) exhibited the best antifungal effects, the corresponding SEM images showed C. albicans had, respectively, undergone extensive shrinkage and porosity deformations. Synergistic antifungal effects all GO derivatives in various ratio of CuNPs combinations were determined by assessing C. albicans viabilities using broth dilution assays. The best synergistic effects were observed when a 30:70 ratio of GO/GO-PEG combined with CuNPs, where MIC50 185-225 µm/mL were recorded. Moreover, the decreased antifungal activities observed in EGO and EGO-PEG may be explained by their poor colloidal stability with increasing nanoparticle concentrations.

TRPC6-Mediated Ca2+ Entry Essential for the Regulation of Nano-ZnO Induced Autophagy in SH-SY5Y Cells.

Recently, possible applications of zinc oxide nanoparticles (nano-ZnO) have been extensively studied owing to their ease of synthesis. However, the effect of nano-ZnO on the nervous system remains unclear. This study investigates the action of nano-ZnO on SH-SY5Y neuroblastoma cells. We found that nano-ZnO (0-50 µg/mL) induced a significant decrease in cell survival rate in a dose-dependent manner, and increased LC3 puncta formation. However, the apoptosis was not affected by nano-ZnO, because the protein levels of cytochrome c, caspase-3, Bcl-xL, and BAX were not varied by the nano-ZnO treatment. Nano-ZnO increased Ca2+ entry and the expression of TRPC6.The results suggested that nano-ZnO increased [Ca2+] through the TRPC-dependent Ca2+ influx, since Ca2+ influx can be prevented by the TRPC inhibitor. Furthermore, cells on nano-ZnO-treatment groups displayed loss of F-actin in a dose dependent manner, which also could be prevented by TRPC inhibitor. Herein, we demonstrated that the nano-ZnO activated TRPC6 channel, thereby increasing the Ca2+ flux and resulting in increased autophagy. Nano-ZnO could have possible anticancer effects in neuroblastoma by inhibiting the proliferation of tumor cells. However, we should also pay attention toward the biosecurity of nano materials.